24 Cores Mini FTTH Dome Fiber Optic Splice Closure 1 Oval 3 Round Ports Heatshrink Seal

This FTTH fiber optical mini dome ftth aerial cheap closures can be placed in aerial, underground, wall-mounting, hand hole mounting and duct-mounting applications.

The strong housing and main components provide fire resistant, waterproof and quakeproof while protecting splices during pulling, torsioning and impacting. It ensures long term reliability and usage under ambient temperature from -40℃ to +65℃.

Features

• Small size, large capacity and convenient maintenance.
• The enclosure casing is made of quality engineering plastics, good performance of anti-erosion against acid and alkali salt, anti-aging, as well as smooth appearance and reliable mechanical structure.
• Each optical cable and fiber can be operated individually.
• Elastic integrated seal ensure tightening fit
• Aerial, underground, wall mount, pole mount,manhole is available
• Innovative insert plates and fixing bolts, used to fix and seal FOSC, simple installation.
• Better performance for protecting fiber cable splices in straight-through an branching.
• The air valve is provided for the closre and used to check the sealing performance.

Specification

Product details

This mini splice closure is slim type, diamter only 100mm, good choice for pole mounted outdoor application, low cost but large capactiy.

Every splicing closure will configurate with heatshrink seal tubes, insolation tape, sand paper, bufrer tube, sleeves, alcohol bag, nylon tie, etc.

Standard mounting kits is wall mount(metal sheet with 1 strap and mounting hole itself), if need pole mount will add one more pole mount strap.

This mini closure can be aerial mounted too, there is 2holes on enclosure body itself, and logo print location, the clamp is special design and lock by hand. Also the hole body have many strength strips to make it suitable for outdoor application.

The optical fiber closure is mini dome type, 1oval 3round ports for most application. The diameter is very large, oval port is 30*50mm, round port can do maximum 21mm. All ports with heat shrink tubes when delivery.

There are total 2pcs splice trays for fusion splicing, each tray can hold maximum 12cores optical fibers, total 24cores.Tray material is ABS, white color. Reasonable bend radius, and large fiber routing area and storage space. And the splice trays are fix on the box with screws in middle.

The internal with cable clamps, and metal kits to hold the cable kits like strength member outer sheath, FRP, metal, aramid yarn, etc.

This 24cores splice closure is with white rubber seal around the bottom to ensure it IP68 waterproof function.

The mounting kits is 1metal sheet with stainless steel tapes around the body, if need pople mount, can add one more tape, see below picture:

Optical splice closure will be packed by individual carton box, with accessories and plastic bag, then in master carton box for shipment. Good protection during long term transporation by sea or by air.