|Max Capacity:||2core||Max. Fusion:||1core|
|Fiber Type:||Singlemode Multimode||Dimension:||115*80*25mm|
|Adapter:||2 SC Or 1 LC Duplex||Input Cable Diameter:||5.8mm|
|Output Cable Diameter:||2*1.6mm Or 2*3.0mm Flat Cable||Application:||Ftth Indoor Network|
|Mounting Way:||Wall Mount With Screw|
IP30 Optical Termination Box,
IP30 Wall Mount Termination Box,
5.8mm Optical Termination Box
2 Port Plastic FTTH Wall Mount IP30 Optical Termination Box
Indoor 2 Port Plastic Optical Roseta FTTH Wall Mount Outlet Faceplate White IP30 Terminal Box SC Coupler
The optical rosette acts as a termination point of the optical network, it use direct connectorization or fusion splice in a pre-connectorized pigtail. It can be installed on the wall, and adapt variety of optical connection styles LC/SC, maximum 2 cores.
|Max.Capacity||2 core (single fiber) or mechanical splices|
|Cable type||Flat/ indoor round cable|
|Maximum input cable diameter||φ5.8mm|
|Outlet cable diameter||2*1.6mm or2*3.0mm flat cable|
|Fiber type||single mode & multimode|
Degree of protection: IEC 60529;
Temperature variation: IEC 61300-2-22;
FTTH internal environment
2pcs Cable entry at front can allow maximum 5.8mm round feeder cable with rubber seal to make it stable, there is plastic cable clamp inside.
On the right front is SC coupler without flange slots, maxim 2 SC optical adapters.We can use standard SC adapter or adapter with dustproo
The fiber storage and management area is large space, 1.5meter is ok, the structure is special, which ensure fiber at place, not move out.
There is 1 pcs heat sherink sleeve fix slot beside the fiber routing area, can use 40mm,45mm or 60mm sleeves, if need, please click:
At front of the box, there is cable entry or adapter output fix location; Fiber optic cable in and out at the same plane, the operation is more convenient and fast, each other does not affect each other, the structure is reasonable and clear;
The box with a screw lock to fix the cover and bottom, the stainless steel expansion screw is firm and reliable. It is covered with a specially customized dust cover, which has good protection, effectively avoids man-made damage.
04 plastic tapes, 02 fixing screws, 02 screws for closing the cover.
Use adapters and connectors, to be acquired separately
Do the splice using the supplied splice protection sleeves with 40 mm long and diameter 3 mm (when contracted), this product must be acquired separately.
Any more questions, please call us at:
We will be back to you at first sight.
There is cable ports at both sides and at back of the box, which ensure flexible fiber distribution and management. when use, please use tools to cut off the block, then can use.
Contact Person: Ms. sophie