Payment & Shipping Terms:
|Max Capacity:||2core||Max. Fusion:||2core|
|Fiber Type:||Singlemode Multimode||Dimension:||110*80*27mm|
|Adapter:||2 SC Or LC Duplex||Cable Type:||Indoor Cable Or Flat Cable|
|Application:||Ftth Indoor Network||Mounting Way:||Wall Mount With Screw|
G657A1 Wall Mounted Termination Box,
IP20 Wall Mounted Termination Box,
G657A1 Termination Box
IP20 G657A1 Wall Mounted Termination Box For Fiber Optic Cable
Indoor IP20 Wall Mounted Optic Terminal Box 2 Core Load With SC/APC Adapters and Pigtails 0.5meter G657A1 LSZH
The optical rosette acts as a termination point of the optical network, it use direct connection or fusion splice in a pre-termination pigtails. It can be installed on the wall, and adapt variety of optical connection styles LC/SC, maximum 2cores.
|Max.Capacity||2 core (single fiber)|
|Cable type||FTTH Flat/ indoor cable|
|Fiber type||single mode & multimode|
Degree of protection: IEC 60529;
Temperature variation: IEC 61300-2-22;
FTTH internal environment wall mount
The box use brand new ABS plastic, white color, total enclosed box with clips at both sides, easy to open and close, no need speical tools.
At top of the box, there is logo print reserved position with paper block if no need, and we can open 2 screws to fix the cover and bottom to make it more safe, then without screw driver, can not open the box by hand. details pls see above picture.
The box front is for adapters exit, only insert the pigtails or patch cord in, then can connected. standard type or shutter type both ok.
The cable enter the box from the bottom middle hole or small square holes at the corners, there is special space for cable routing. Which make it more clean after installation, no cable will be seen by human eye.
if on field installation use mechanical splicer, we can fix a holder at the 4 holes around the big hole in the middle. There are many wall mounting holes design at the bottom plate to make installation easier.
Above picture is fully load with 1pc SC/APC pigtails G657B3 LSZH 1.5meter white color and 1pc SC/APC adapter+ 1pc bare fiber mechnical splicer and holders.
Contact Person: Ms. sophie