16 Port Mid Span Plastic Gray ABS PC SC Reinforced Adapter Fiber Access Terminal Box
FDB0216Y fiber access termination box is able to hold up to 16 subscribers. It is used as a termination point
for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting,
distribution, storage and cable connection in one solid protection box.
|Cable port||1 express port (mid span), 2 cable glands|
|Max capacity||96 cores 4*24fiber tray|
|Max. Reinforced SC Adapter qty||16 pcs Mini SC coupler|
|Max. PLC splitter||2 pcs 1:8 or 1pc 1:16 block less splitter|
whole box is total enclosed, and with 5pcs splice tray, can hold 1x16 plc splitter or 2x16 splitter, 16pcs SC reinforced adapters/
4buckles at both sides of the box with strength strips to make it stronger.
laser mark and wiring label on the top of the lid.
outputs is SC reinforced adapters, inside is normal type of SC connector, which is the output of the splitter,outside is the Mini SC connectors, must use the compatible SC mini connectors, the connector cable can be ftth drop cable or ftta round cable 5mm, both ok.
if there are more than 1 splitter inside of the box, in order to distinguish and make on-site construction easier, use colorful adapter caps to identify: such as blue, green, red, or black, etc.
inside of the box, there is enoush space for cable routing and fixation, there is cable clamp and metal rods to fix the entry cable, output of the splitter with number 12345678...16 and input of the connector can be insert into the adapters too with IN label ring.
there is steel tube fix position on each tray. and each tray can max. fusion 12cores 1way, 2way 24cores.
Splice cassette and cable management tool, installation nuts and bolts, protection sleeves, hose clamp, cable tube,
key, wrench, rubber seal for cable entrance.
Pole mounted kits, Aerial hanging kits, plc splitter, Opti-tap adapters